Buying guide
Reverse osmosis for the home: which to buy
If you want to stop buying bottled water and don’t mind fitting something under the sink, my pick is the Waterdrop G3P600. If there’s no socket there, the iSpring RCC7 with its tank.
Reviewed on 17 Nov 2026. I haven’t tested these products: I compare their spec pages. Prices change, so I don’t copy them here: check them at the link.

Quick summary
- My pickWaterdrop G3P600
- Fewer filtersWaterdrop G5P500
- No socketiSpring RCC7 (with tank)
I haven’t tested these systems. I compare their official spec page (Waterdrop publishes one) and, when there isn’t one, the amazon.co.uk listing. Every figure has its source at the end.
First things first: tap water in England and Wales is regulated and checked by the Drinking Water Inspectorate. A reverse osmosis system isn’t there to “make it safe”; it changes the taste and removes most of the dissolved salts, limescale included. If your question is a different one, start with which system do you need?.
What I look at in a reverse osmosis system
- Tank or tankless. Tankless takes less room but needs a socket; with a tank it usually works without power.
- Waste ratio. How much water goes down the drain per litre treated. 2:1 means one litre to the drain for every two you drink.
- Filters and their life. How many there are and how often they’re changed, according to the maker.
- Certificates. NSF/ANSI 58 is the reverse osmosis standard; 372, the lead-free materials one. I only mention them if the maker publishes them.
- Fitting. They all need a cold-water feed, a drain connection and a hole for their own tap.
The four systems, spec by spec
Waterdrop G3P600
My pickFor anyone who wants the display tap and three filters changed separately.
- Under-sink fitting
- Needs a socket
- Filters: 6, 12 and 24 months
| Type | Tankless reverse osmosis |
|---|---|
| Flow rate | 600 GPD |
| Pure : drain | 2 : 1 |
| Stages | 8 |
| Filters | CF 6 months · CB 12 months · RO 24 months |
| Certificates | NSF/ANSI 42, 53, 58 and 372 (IAPMO R&T) |
| Size | 46 × 14.4 × 45 cm |
| Warranty | 1 year |
- Tap with a display showing TDS and filter life
- Three separate filters: you change only the one that’s due
- Takes little room under the sink, as there is no tank
- Needs a socket under the sink
- Three filters to buy instead of two
- On well water, Waterdrop asks for pre-filtration before the unit
Waterdrop G5P500
Fewer filtersFor anyone who wants NSF/ANSI 58 with only two filters to buy.
- Under-sink fitting
- Needs a socket
- Filters: 6 and 24 months
| Type | Tankless reverse osmosis |
|---|---|
| Flow rate | 500 GPD |
| Pure : drain | 2 : 1 |
| Stages | 7 |
| Filters | CF 6 months · RO 24 months (the table on the same page says 12) |
| Certificates | NSF/ANSI 58 and 372 |
| Size | 42.4 × 14.5 × 35.3 cm |
| Warranty | 1 year |
- NSF/ANSI 58 (the reverse osmosis standard) with only two filters
- The smallest of the three tankless Waterdrops
- Mechanical tap, no display
- Waterdrop gives two different lives for the RO filter on the same page
Waterdrop G2P600
For anyone who wants 600 GPD with only two filters.
- Under-sink fitting
- Needs a socket
- Filters: 12 and 24 months
| Type | Tankless reverse osmosis |
|---|---|
| Flow rate | 600 GPD |
| Pure : drain | 2 : 1 |
| Stages | 7 |
| Filters | CF 12 months · RO 24 months |
| Certificates | NSF/ANSI 372 (Waterdrop’s table) |
| Warranty | 1 year |
- Same flow rate as the G3P600 with two filters instead of three
- The CF filter lasts 12 months instead of 6
- Waterdrop’s table only lists NSF/ANSI 372 (materials), not 58
- Tap without a display
iSpring RCC7 (with tank)
No socketFor anyone with no socket under the sink.
- Under-sink fitting
- No socket
- Filter life: not in the listing
| Type | Reverse osmosis with a storage tank |
|---|---|
| Stages | 5 |
| Flow rate | 75 GPD (listing) |
| Certificates | NSF/ANSI 58 (listing) |
| Tap | Brushed nickel, top-mounted |
| Replacement filters | Sets F7-GAC and F22-75, listed by iSpring on the listing |
- No pump: works without a socket
- Replacement filter sets named on the listing, easy to find
- The tank takes up room under the sink
- Much lower flow rate than the tankless ones: the tank makes up for it
- The listing doesn’t say how often each filter is changed
What I would buy
I’d buy the Waterdrop G3P600: it has the most complete spec page, four NSF/ANSI certificates published and a tap that tells you when to change each filter. If you’re unsure about tank or tankless, I explain it in tank or tankless.
Sources
- Waterdrop: G3P600 product page
- Waterdrop EU: G5P500 product page (in Spanish)
- Waterdrop: G3P600 page with the G2P600 comparison table
- iSpring RCC7 (with tank) listing on amazon.co.uk
- Drinking Water Inspectorate: water hardness, the mg/l CaCO3 scale and the WHO reference
- Waterdrop UK: G3P600 product page (certificates, flow rate and FAQ)





