The best
Tankless reverse osmosis: the best
For most people, the Waterdrop G3P600. For NSF/ANSI 58 with fewer filters to buy, the G5P500.
Reviewed on 17 Nov 2026. I haven’t tested these products: I compare their spec pages. Prices change, so I don’t copy them here: check them at the link.

Quick summary
- My pickWaterdrop G3P600
- Fewer filtersWaterdrop G5P500
Tankless means the water is treated on demand: the unit has a pump and so needs a socket under the sink. In return, it takes up much less room.
Data from Waterdrop’s official pages, checked on 17 Nov 2026.
| Model | Flow | Waste ratio | Filters | Certificates |
|---|---|---|---|---|
| G3P600 | 600 GPD | 2:1 | 3 (6, 12 and 24 months) | NSF/ANSI 42, 53, 58, 372 |
| G5P500 | 500 GPD | 2:1 | 2 (6 and 24 months) | NSF/ANSI 58, 372 |
| G2P600 | 600 GPD | 2:1 | 2 (12 and 24 months) | NSF/ANSI 372 |
The three systems
Waterdrop G3P600
My pickThe most complete: display, three filters and four NSF/ANSI certificates.
- Under-sink fitting
- Needs a socket
- Filters: 6, 12 and 24 months
| Type | Tankless reverse osmosis |
|---|---|
| Flow rate | 600 GPD |
| Pure : drain | 2 : 1 |
| Stages | 8 |
| Filters | CF 6 months · CB 12 months · RO 24 months |
| Certificates | NSF/ANSI 42, 53, 58 and 372 (IAPMO R&T) |
| Size | 46 × 14.4 × 45 cm |
| Warranty | 1 year |
- Tap with a display showing TDS and filter life
- Three separate filters: you change only the one that’s due
- Takes little room under the sink, as there is no tank
- Needs a socket under the sink
- Three filters to buy instead of two
- On well water, Waterdrop asks for pre-filtration before the unit
Waterdrop G5P500
Fewer filtersNSF/ANSI 58 and 372 with two filters.
- Under-sink fitting
- Needs a socket
- Filters: 6 and 24 months
| Type | Tankless reverse osmosis |
|---|---|
| Flow rate | 500 GPD |
| Pure : drain | 2 : 1 |
| Stages | 7 |
| Filters | CF 6 months · RO 24 months (the table on the same page says 12) |
| Certificates | NSF/ANSI 58 and 372 |
| Size | 42.4 × 14.5 × 35.3 cm |
| Warranty | 1 year |
- NSF/ANSI 58 (the reverse osmosis standard) with only two filters
- The smallest of the three tankless Waterdrops
- Mechanical tap, no display
- Waterdrop gives two different lives for the RO filter on the same page
Waterdrop G2P600
The G3P600’s flow rate with two filters.
- Under-sink fitting
- Needs a socket
- Filters: 12 and 24 months
| Type | Tankless reverse osmosis |
|---|---|
| Flow rate | 600 GPD |
| Pure : drain | 2 : 1 |
| Stages | 7 |
| Filters | CF 12 months · RO 24 months |
| Certificates | NSF/ANSI 372 (Waterdrop’s table) |
| Warranty | 1 year |
- Same flow rate as the G3P600 with two filters instead of three
- The CF filter lasts 12 months instead of 6
- Waterdrop’s table only lists NSF/ANSI 372 (materials), not 58
- Tap without a display
What I would buy
I’d go for the G3P600. If there’s no socket under your sink, look at the iSpring RCC7 in reverse osmosis. If you can’t fit anything, countertop reverse osmosis.




