Buying guide

Water softeners for the home: which to buy

If limescale is ruining taps, shower screens and appliances all over the house, what removes it is an ion-exchange resin softener. On amazon.co.uk, the one with the most data is the iSpring WCS15KG.

Reviewed on 17 Nov 2026. I haven’t tested these products: I compare their spec pages. Prices change, so I don’t copy them here: check them at the link.

White domestic water softener with its salt tank next to the mains water inlet in a utility room

Quick summary

I haven’t tested these softeners. The data comes from their amazon.co.uk listings. Most resin softeners in the UK are sold and fitted by installers, and few on Amazon publish enough data; I only include what I can source.

A softener goes on the incoming mains supply: it treats the whole house, not just the kitchen tap. So a plumber nearly always fits it, and if you rent you need permission. Before buying, check how hard your water is: I explain it in how to find your water hardness.

What I look at in a softener

  • Resin and capacity. More resin, more water between regenerations.
  • Metered regeneration. It regenerates by the water you use, not by the calendar.
  • Bypass. To stop treating the water without removing the unit.
  • Size. The space near the incoming supply decides.
  • A drinking-water tap. It’s common in the UK to keep one tap on unsoftened water: ask your installer.

The softeners

iSpring WCS15KG

My pick on amazon.co.uk

For a home where limescale is a real problem and a plumber can fit it.

  • Fitted on the mains supply
  • Electronic control valve
  • Salt: as you use it
TypeIon-exchange resin softener, single tank
RegenerationAutomatic backwash and regeneration (listing)
Connection3/4" BSP (listing)
UseIndoors, cold supply only (listing)
SettingsSet by the number of people in the home; salt-shortage reminder and holiday mode (listing)
  • A real resin softener: it lowers hardness
  • Compact single-tank design
  • The listing gives no capacity or maximum hardness
  • A plumber has to fit it on the incoming supply
  • The only resin softener I found with enough data on amazon.co.uk

iSpring ED2000 (electronic, salt-free)

I include it so you can see the difference: the maker says it doesn’t change the chemistry of the water.

  • Wraps around the pipe
  • Needs a socket
  • No salt, no filters
TypeElectronic conditioner (wires around the pipe)
ForWater of 10 to 19 grains per gallon, according to the listing (about 170 to 325 mg/l CaCO3)
FittingNo plumbing modifications (listing)
What the maker says“Does not change the chemistry of water” (listing)
  • No pipe cutting and no salt to buy
  • You can take it with you when you move
  • The maker itself says it doesn’t change the chemistry of the water: hardness stays the same
  • I include it to explain the difference, not as a recommendation

What I would buy

If you can fit one, a resin softener is what lowers hardness. If you only want better drinking water, you don’t need a softener: see softener or reverse osmosis. And if you’re wondering about the “salt-free” ones, I explain it in do salt-free softeners work?.

Sources